트리플루오로보란

트리플루오로보란 속성

트리플루오로보란 C화학적 특성, 용도, 생산

물성

삼불화붕소는 부식성을 가지고 있어 이 화합물을 처리하기 위해 적합한 금속으로는스테인레스 스틸(Stainless Steel), 모넬(Monel), 하스텔로이(Hastelloy) 등이 있으나,습기가 포함되어 있는 경우에는 위의 금속들도 부식될 수 있습니다.

개요

삼불화붕소는 상온에서 자극적인 냄새가 나고 독성을 가진 무색의 기체 상태를 유지하는 화합물로,공기보다 무거우며 공기와 반응해 하얀 색의 유독가스를 발생시키는 특징을 가지고 있습니다. 물에 녹으며 물에 의해 천천히 가수분해되어 부식성 물질을 생성합니다.

용도

삼불화붕소는 상업적으로 사붕산나트륨(Sodium tetraborate)에 불화수소산(Hydrofluoric acid)과황산(Sulfuric acid)을 단계적으로 첨가해서 생산되며, 유기 합성에 있어 시약으로 가장 많이 사용됩니다.

용도

BF3는 에스테르 화, 알 킬레이트, 중합, 이성질체 화, 설포 네이트, 니트로 화와 같은 유기 반응 촉매로 사용될 수있다. 할로겐화 붕소, 원소 붕소, 보란, 수소화 붕소 나트륨을 만드는 물질.

화학적 성질

Boron trifluoride is a nonflammable, colorless gas with an acrid suffocating odor. It forms thick acidic fumes in moist air. Dry boron trifluoride is used with mild steel, copper, copper-zinc and copper-silicon alloys, and nickel. Moist gas is corrosive to most metallic materials and some plastics. Therefore, Kel-F and Teflon are the preferred gasketing materials. Mercury containing manometers should not be used because boron trifluoride is soluble in mercury. It decomposes in hot water yielding hydrogen fluoride, Shipped as a nonliquefied compressed gas.

물리적 성질

Colorless gas; pungent suffocating odor; density 2.975 g/L; fumes in moist air; liquefies at -101°C; solidifies at -126.8°; vapor pressure at -128°C is 57.8 torr; critical temperature -12.2°C; critical pressure 49.15 atm; critical volume 115 cm³/mol; soluble in water with partial hydrolysis; solubility in water at 0°C 332 g/100g; also soluble in benzene, toluene, hexane, chloroform and methylene chloride; soluble in anhydrous concentrated sulfuric acid.

용도

Boron trifluoride is used as a catalyst for polymerizations, alkylations, and condensation reactions; To protect molten magnesium and its alloys from oxidation; as a gas flux for internal soldering or brazing; in ionization chambers for the detection of weak neutrons; and as a source of B10 isotope.  By far the largest application of boron trifluoride is in catalysis with and without promoting agents.

용도

Boron trifluoride is the most widely used boron halide. Most applications take advantage of its strong Lewis acidity. The most important uses are in organic syntheses. Boron trifluoride is commonly used as a catalyst for Friedel-Crafts alkylation reactions. It also is used to catalyze the cleavage of ethers to alcohols, to catalyze esterification reactions, and in the nitration and sulfonation of aromatic compounds. Many olefin polymerization reactions use BF3 as an initiator, in conjunction with a proton donor, such as water. Also BF3 is used to catalyze the isomerization of alkenes and alkanes and in petroleum cracking and desulfurization. Amine complexes of BF3 are used as epoxy curing agents.

제조 방법

Boron trifluoride is prepared by treating borax with hydrofluoric acid; or boric acid with ammonium bifluoride. The complex intermediate product is then treated with cold fuming sulfuric acid.

일반 설명

Boron trifluoride is a colorless gas with a pungent odor. Boron trifluoride is toxic by inhalation. Boron trifluoride is soluble in water and slowly hydrolyzed by cold water to give off hydrofluoric acid, a corrosive material. Its vapors are heavier than air. Prolonged exposure of the containers to fire or heat may result in their violent rupturing and rocketing.

공기와 물의 반응

Fumes in air. Soluble in water and slowly hydrolyzed by cold water to give hydrofluoric acid. Reacts more rapidly with hot water.

반응 프로필

Boron trifluoride is a colorless, strongly irritating, toxic gas. Upon contact with water, steam or when heated to decomposition, Boron trifluoride will produce toxic fluoride fumes. Incompatible with alkyl nitrates, calcium oxide. Reaction with alkali metals or alkaline earth metals (except magnesium) will cause incandescence [Bretherick, 5th ed., 1995, p. 65].

위험도

Toxic by inhalation, corrosive to skin and tissue. Lower respiratory tract irritant, and pneu- monitis.

건강위험

Boron trifluoride (and organic complexes such as BF3-etherate) are extremel corrosive substances that are destructive to all tissues of the body. Upon contact with moisture in the skin and other tissues, these compounds react to form hydrofluoric acid and fluoroboric acid, which cause severe burns. Boron trifluoride gas is extremely irritating to the skin, eyes, and mucous membranes. Inhalation of boron trifluoride can cause severe irritation and burning of the respiratory tract, difficult breathing, and possibly respiratory failure and death. Exposure of the eyes to BF can cause severe burns and blindness. This compound is not considered to have adequate warning properties. Boron trifluoride has not been found to be carcinogenic or to show reproductive or developmental toxicity in humans. Chronic exposure to boron trifluoride gas can cause respiratory irritation and damage.

화재위험

When heated to decomposition or upon contact with water or steam, Boron trifluoride will produce toxic and corrosive fumes of fluorine containing compounds. Decomposes upon heating or on contact with moist air, forming toxic and corrosive fumes of boric acid and hydrofluoric acid. Reacts with alkalis and fumes in moist air, producing particulates which reduce visibility. Reacts with alkali metals, alkaline earth metals (except magnesium), alkyl nitrates, and calcium oxide. Boron trifluoride hydrolyzes in moist air to form boric acid, hydrofluoric acid, and fluoboric acid.

인화성 및 폭발성

Boron trifluoride gas is noncombustible. Water should not be used to extinguish any fire in which boron trifluoride is present. Dry chemical powder should be used for fires involving organic complexes of boron trifluoride.

Materials Uses

Dry boron trifluoride does not react with the common metals of construction, but If moisture is present the acidic hydrates formed (BF3·H2O and BF3·2H2O) can corrode many common metals rapidly. Consequently, lines, pressure regulators, and valves in boron trifluoride service must be well protected from the entrance of moist air between periods of use. Cast iron must not be used because active fluorides attack its structure. If steel piping is used for boron trifluoride, forged-steel fittings must be used instead of cast-iron fittings. Stainless steel, Monel, nickel, and Hastelloy C are good materials of construction.
Among materials suitable for gaskets are Teflon, Kel F, and other appropriate fluorocarbon or chlorofluorocarbon plastics. Most plastics become embrittled in boron trifluoride service. The use of polyvinyl chloride should be avoided.

잠재적 노출

Boron trifluoride is a highly reactive chemical used primarily as a catalyst in chemical synthesis. It is stored and transported as a gas, but can be reacted with a variety of materials to form both liquid and solid compounds. The magnesium industry utilizes the fireretardant and antioxidant properties of boron trifluoride in casing and heat treating. Nuclear applications of boron trifluoride include neutron detector instruments; boron-10 enrichment and the production of neutroabsorbing salts for molten-salt breeder reactors.

저장

All work with boron trifluoride should be conducted in a fume hood to prevent exposure by inhalation, and splash goggles and impermeable gloves should be worn to prevent eye and skin contact. Cylinders of boron trifluoride should be stored in locations appropriate for compressed gas storage and separated from alkali metals, alkaline earth metals, and other incompatible substances. Solutions of boron trifluoride should be stored in tightly sealed containers under an inert atmosphere in secondary containers.

운송 방법

UN1008 Boron trifluoride, Hazard class: 2.3; Labels: 2.3—Poisonous gas, 8—Corrosive material, Inhalation Hazard Zone B. Cylinders must be transported in a secure upright position, in a well-ventilated truck. Protect cylinder and labels from physical damage. The owner of the compressed gas cylinder is the only entity allowed by federal law (49CFR) to transport and refill them. It is a violation of transportation regulations to refill compressed gas cylinders without the express written permission of the owner.

Purification Methods

The usual impurities-bromine, BF5, HF and non-volatile fluorides-are readily separated by distillation. Brown and Johannesen [J Am Chem Soc 72 2934 1950] passed BF3 into benzonitrile at 0o until the latter was saturated. Evacuation to 10-5mm then removed all traces of SiF4 and other gaseous impurities. [A small amount of the BF3-benzonitrile addition compound sublimes and is collected in a U-tube cooled to -80o]. The pressure is raised to 20mm by admitting dry air, and the flask containing the BF3 addition compound is warmed with hot water. The BF3 that evolves is passed through a -80o trap (to condense any benzonitrile) into a tube cooled in liquid air. The addition compound with anisole can also be used. BF3 can be dried by passing it through H2SO4 saturated with boric oxide. It fumes in moist air. [It is commercially available as a 1.3M solution in MeOH or PrOH.] [Booth & Wilson Inorg Synth I 21 1939, Kwasnik in Handbook of Preparative Inorganic Chemistry (Ed. Brauer) Academic Press Vol I pp 219-222 1963.] TOXIC.

비 호환성

Boron trifluoride reacts with polymerized unsaturated compounds. Decomposes on contact with water, moist air, and other forms of moisture, forming toxic and corrosive hydrogen fluoride, fluoroboric acid, and boric acid. Reacts violently with alkali and alkaline earth metals (except magnesium); metals, such as sodium, potassium, and calcium oxide, and with alkyl nitrates. Attacks many metals in presence of water.

폐기물 처리

Return refillable compressed gas cylinders to supplier. The owner of the compressed gas cylinder is the only entity allowed by federal law (49CFR) to transport and refill them. Chemical reaction with water to form boric acid, and fluoroboric acid. The fluoroboric acid is reacted with limestone, forming boric acid and calcium fluoride. The boric acid may be discharged into a sanitary sewer system while the calcium fluoride may be recovered or landfilled. Protect cylinder and labels from physical damage.

주의 사항

Exposures to boron trifl uoride in occupational work areas cause irritating effects, painful burns, lesions, and loss of vision. Workers with potential exposure to boron trifl uoride should not wear contact lenses. Prompt medical attention is mandatory in all cases of overexposure to boron trifl uoride and the rescue personnel should be equipped with proper protectives. Occupational workers should handle/use boron trifl uoride only in well-ventilated areas. The valve protection caps must remain in place. Workers should not drag, slide, or roll the cylinders, and use a suitable hand truck for cylinder movement. Compressed gas cylinders shall not be refi lled without the express written permission of the owner. Boron trifl uoride is listed as an extremely hazardous substance (EHS). The cylinder should not be heated by any means to increase the discharge rate of the product from the cylinder. The cylinder of boron trifl uoride should be kept stored in a cool, dry, well-ventilated area of non-combustible construction away from heavily traffi cked areas and emergency exits

트리플루오로보란 준비 용품 및 원자재

원자재

준비 용품

트리플루오로보란 관련 검색: