14128-54-2 (氘化铝锂,Lithium aluminum deuteride)

Name:	Lithium aluminum deuteride 98 atom % D Material Safety Data Sheet
Synonym:	Aluminate(1-), tetrahydro-d4-, lithium,; Lithium tetradeuteridoaluminat
CAS:	14128-54-2

Section 1 - Chemical Product ? MSDS Name:Lithium aluminum deuteride 98 atom % D Material Safety Data Sheet
Synonym:Aluminate(1-), tetrahydro-d4-, lithium,; Lithium tetradeuteridoaluminat

---

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS

CAS#	Chemical Name	content	EINECS#
14128-54-2	Lithium aluminum deuteride	98	237-980-6

Hazard Symbols: F C
Risk Phrases: 11 15 17 34

---

Section 3 - HAZARDS IDENTIFICATION
? EMERGENCY OVERVIEW
Highly flammable. Contact with water liberates extremely flammable gases. Spontaneously flammable in air. Causes burns.Corrosive.
Potential Health Effects
Eye:
Causes eye burns. When substance becomes wet or comes in contact with moisture of the mucous membranes, it will cause irritation. May cause lacrimation (tearing), blurred vision, and photophobia. May cause chemical conjunctivitis and corneal damage.
Skin:
Causes skin burns. May cause dermatitis. May cause cyanosis of the extremities. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause perforation of the digestive tract. Ingestion of large amounts may cause CNS depression. May cause systemic effects. May cause nausea, vomiting, and diarrhea, possibly with blood.
Inhalation:
Causes chemical burns to the respiratory tract. Aspiration may lead to pulmonary edema. Vapors may cause dizziness or suffocation. May cause systemic effects. Olfactory fatigue may occur. May cause burning sensation in the chest.
Chronic:
Effects may be delayed.

---

Section 4 - FIRST AID MEASURES
? Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Wash clothing before reuse. Destroy contaminated shoes. If water-reactive products are embedded in the skin, no water should be applied. The embedded products should be covered with a light oil.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Do not use mouth-to-mouth resuscitation if victim ingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device.
Notes to Physician:

---

Section 5 - FIRE FIGHTING MEASURES
? General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Reacts violently with water giving off flammable gas which may explode. Vapors may form an explosive mixture with air. Vapors can travel to a source of ignition and flash back. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Dust can be an explosion hazard when exposed to heat or flame. Flammable solid. May ignite or explode on contact with steam or moist air. May re-ignite after fire is extinguished. Runoff to sewer may create fire or explosion hazard.
Extinguishing Media:
Do NOT get water inside containers. Contact professional fire-fighters immediately. Cool containers with flooding quantities of water until well after fire is out. DO NOT USE WATER OR FOAM. Use DRY sand, sodium chloride powder, graphite powder, copper powder or Lith-X powder.

---

Section 6 - ACCIDENTAL RELEASE MEASURES
? General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Avoid generating dusty conditions. Remove all sources of ignition.
Provide ventilation. Do not get water on spilled substances or inside containers. Cover with dry earth, dry sand, or other non-combustible material followed with plastic sheet to minimize spreading and contact with water.

---

Section 7 - HANDLING and STORAGE
? Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well-ventilated area. Do not allow water to get into the container because of violent reaction. Minimize dust generation and accumulation. Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Avoid contact with eyes, skin, and clothing. Do not get in eyes, on skin, or on clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep away from heat, sparks and flame. Avoid ingestion and inhalation. Do not ingest or inhale. Do not allow contact with water. Discard contaminated shoes. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. Keep from contact with moist air and steam.
Storage:
Keep away from heat, sparks, and flame. Keep away from water. Water free area. Keep containers tightly closed. Store in a cool, dry area away from incompatible substances.

---

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
? Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate general or local explosion-proof ventilation to keep airborne levels to acceptable levels.
Exposure Limits CAS# 14128-54-2: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

---

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
?
Physical State: Powder
Color: white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 175 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: > 175 deg C
Solubility in water: reacts
Specific Gravity/Density: Not available.
Molecular Formula: AlD4Li
Molecular Weight: 41.98

---

Section 10 - STABILITY AND REACTIVITY
? Chemical Stability:
Stable under normal temperatures and pressures. Combines vigorously or explosively with water.
Conditions to Avoid:
Incompatible materials, ignition sources, dust generation, excess heat, strong oxidants, exposure to moist air or water.
Incompatibilities with Other Materials:
Water, strong oxidizing agents, acids, alcohols.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases, hydrogen gas, aluminum oxide.
Hazardous Polymerization: Will not occur.

---

Section 11 - TOXICOLOGICAL INFORMATION
? RTECS#:
CAS# 14128-54-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Lithium aluminum deuteride - Not listed by ACGIH, IARC, or NTP.

---

Section 12 - ECOLOGICAL INFORMATION
?

---

Section 13 - DISPOSAL CONSIDERATIONS
? Dispose of in a manner consistent with federal, state, and local regulations.

---

Section 14 - TRANSPORT INFORMATION
?
IATA
Shipping Name: LITHIUM ALUMINIUM HYDRIDE
Hazard Class: 4.3
UN Number: 1410
Packing Group: I
IMO
Shipping Name: LITHIUM ALUMINIUM HYDRIDE
Hazard Class: 4.3
UN Number: 1410
Packing Group: I
RID/ADR
Shipping Name: LITHIUM ALUMINIUM HYDRIDE
Hazard Class: 4.3
UN Number: 1410
Packing group: I

---

Section 15 - REGULATORY INFORMATION
?
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F C
Risk Phrases:
R 11 Highly flammable.
R 15 Contact with water liberates extremely
flammable gases.
R 17 Spontaneously flammable in air.
R 34 Causes burns.
Safety Phrases:
S 7/8 Keep container tightly closed and dry.
S 24/25 Avoid contact with skin and eyes.
S 43B In case of fire, use fire-fighting equipment
on basis of sodium chloride, sodium bicarbonate (never
use water).
WGK (Water Danger/Protection)
CAS# 14128-54-2: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 14128-54-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 14128-54-2 is not listed on the TSCA inventory.
It is for research and development use only.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A