678-26-2 (全氟正戊烷,Perfluoro-n-pentane)

---

Section 1: Product Identification
   Chemical Name:       Perfluoro-n-pentane, min. 98%    
   CAS Registry Number:       678-26-2    
   Formula:       C5F12    
   EINECS Number:       211-647-5    
   Chemical Family:       organofluorine compounds    
   Synonym:       duodecafluoropentane, perfluoropentane    

---

Section 2: Composition and Information on Ingredients
   Ingredient       CAS Number       Percent       ACGIH (TWA)       OSHA (PEL)    
   Title Compound       678-26-2       100%       2.5mg/m3 (as F)       2.5mg/m3 (as F)    

---

Section 3: Hazards Identification
   Emergency Overview:       Irritating to skin, eyes and respiratory tract.    
   Primary Routes of Exposure:       Ingestion, inhalation, eyes and skin    
   Eye Contact:       Causes slight to mild irritation of the eyes.    
   Skin Contact:       Causes slight to mild irritation of the skin. May cause redness, itching and pain.    
   Inhalation:       Irritating to the nose, mucous membranes and respiratory tract.    
   No specific information is available on the physiological effects of ingestion. May cause gastrointestinal
   Ingestion:
   irritation, nausea, and vomiting.
   Acute Health Affects:       Irritating to skin, eyes and respiratory tract.    
   Product contains fluorine which under certain conditions of use, decomposition, or metabolism, may generate
   Chronic Health Affects:       fluoride ion, causing, nausea, vomiting, labored breathing, hypocalcaemia, deterioration of bone and tooth    
   structure, kidney and liver damage.
   NTP:       No    
   IARC:       No    
   OSHA:       No    

---

SECTION 4: First Aid Measures
   Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
   Eye Exposure:
   assistance in keeping their eye lids open. Get immediate medical attention.
   Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
   Skin Exposure:
   irritation persists.
   Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty
   Inhalation:
   in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
   Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
   Ingestion:
   vomiting only if directed by medical personnel.

---

SECTION 5: Fire Fighting Measures
   Flash Point:       not applicable    
   Autoignition Temperature:       no data    
   Explosion Limits:       no data    
   Extinguishing Medium:       none required    
   If this product is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure
   Special Fire Fighting Procedures:
   self-contained breathing apparatus and full protective clothing.
   Hazardous Combustion and       If involved in a fire, this material may emit toxic organic fumes, and corrosive hydrogen and carbonyl fluorides.    
   Decomposion Products:
   Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.

---

SECTION 6: Accidental Release Measures
   Small spills can be mixed with vermiculite, sodium carbonate or other suitable non combustible adsorbent and
   Spill and Leak Procedures:
   swept up.

---

SECTION 7: Handling and Storage
   Handling and Storage:       Store in a tightly sealed container in a cool well ventilated area.    

---

SECTION 8: Exposure Controls and Personal Protection
   Eye Protection:       Always wear approved safety glasses when handling a chemical substance in the laboratory.    
   Skin Protection:       Wear protective clothing and gloves.    
   Ventilation:       If possible, handle the material in an efficient fume hood.    
   If ventilation is not available a respirator should be worn. The use of respirators requires a Respirator
   Respirator:
   Protection Program to be in compliance with 29 CFR 1910.134.
   Ventilation:       If possible, handle the material in an efficient fume hood.    
   Additional Protection:       No additional protection required.    

---

SECTION 9: Physical and Chemical Properties
   Color and Form:       colorless liq.    
   Molecular Weight:       288.03    
   Melting Point:       -120°    
   Boiling Point:       29°C    
   Vapor Pressure:       no data    
   Specific Gravity:       1.63+/-0.06@25°C    
   Odor:       none    
   Solubility in Water:       insoluble    

---

SECTION 10: Stability and Reactivity
   Stability:       (store cold)    
   Hazardous Polymerization:       no hazardous polymerization    
   Conditions to Avoid:       None    
   Incompatibility:       active metals, strong oxidizing agents.    
   Decomposition Products:       carbon monoxide, organic fumes, hydrogen fluoride, and carbonyl fluoride    

---

SECTION 11: Toxicological Information
   RTECS Data:       Inhalation (rat); LC: 120 gm/m3.    
   Carcinogenic Effects:       No data available    
   Mutagenic Effects:       No data available    
   Tetratogenic Effects:       No data available    

---

SECTION 12: Ecological Information
   Ecological Information:       No information available    

---

SECTION 13: Disposal Considerations
   Disposal:       Dispose of according to local, state and federal regulations.    

---

SECTION 14: Transportation
   Shipping Name (CFR):       Non-hazardous    
   Hazard Class (CFR):       NA    
   Additional Hazard Class (CFR):       NA    
   Packaging Group (CFR):       NA    
   UN ID Number (CFR):       NA    
   Shipping Name (IATA):       Non-hazardous    
   Hazard Class (IATA):       NA    
   Additional Hazard Class (IATA):       NA    
   Packaging Group (IATA):       NA    
   UN ID Number (IATA):       NA    

---

SECTION 15: Regulatory Information
   TSCA:       Listed in the TSCA inventory.    
   SARA (Title 313):       Title compound not listed.    
   Second Ingredient:       none    

---

SECTION 16 - ADDITIONAL INFORMATION
N/A