Human ACKR3 mRNA 能编码人类非典型趋化因子受体 3（ACKR3）蛋白，该蛋白属于 G 蛋白偶联受体家族的一员。ACKR3 是一种典型的趋化因子受体，它通过高亲和力的趋化因子结合来控制趋化因子的水平和定位，这种结合与经典的配体驱动信号转导级联反应无关，而是导致趋化因子的封闭、降解或跨细胞转运。
脂多糖,来源于肠沙门氏菌肠道血清型
Lipopolysaccharides, from S. enterica (Salmonella enterica) serotype typhimurium 是来源于血清型沙门氏菌 (S. enterica) 的脂多糖内毒素和 TLR4 激活剂，是 S 型 LPS。Lipopolysaccharides, from S. enterica 具有典型的 3 部分结构：O 抗原、核心寡糖和脂质 A。Lipopolysaccharides, from S. enterica serotype typhimurium 可调控细菌在树突状细胞（DC）中的命运，决定 DC 细胞对细菌的摄取、降解和免疫功能的激活。
建议配制浓度 ≥2 mg/mL，充分涡旋震荡 10 分钟以上，必要时辅助超声。由于 LPS 具有吸附特性，分装保存时需使用硅烷化容器或低吸附离心管，使用前充分混匀。
脂多糖,来源于牙龈卟啉单胞菌
Lipopolysaccharides, from P. gingivalis (LPS, from Porphyromonas gingivalis) 是从牙龈变形杆菌 (P. gingivalis) 中提取的脂多糖内毒素和 TLR-4 激活剂，是一种 S (smooth) 型 LPS。Lipopolysaccharides, from P. gingivalis 具有典型的 3 部分结构：O 抗原、核心寡糖和脂质 A。Lipopolysaccharides, from P. gingivalis 激活免疫细胞的 TLR-4，是牙周病机制中的重要毒力因子。Lipopolysaccharides, from P. gingivalis 可用于牙周炎相关研究。
建议配制浓度 ≥2 mg/mL，充分涡旋震荡 10 分钟以上，必要时辅助超声。由于 LPS 具有吸附特性，分装保存时需使用硅烷化容器或低吸附离心管，使用前充分混匀。
脂多糖,来源于大肠杆菌O127:B8
Lipopolysaccharides, from E. coli O127:B8 (LPS, from Escherichia coli (O127:B8)) 是从大肠杆菌 (E. coli O127:B8) 中提取的脂多糖内毒素和 TLR-4 激活剂，是一种 S (smooth) 型 LPS。Lipopolysaccharides, from E. coli O127:B8 具有典型的 3 部分结构：O 抗原、R3 型核心寡糖和脂质 A。Lipopolysaccharides, from E. coli O127:B8 激活免疫细胞的 TLR-4，可引起炎症反应和回肠收缩力，可用于构建肠道炎症模型。
建议配制浓度 ≥2 mg/mL，充分涡旋震荡 10 分钟以上，必要时辅助超声。由于 LPS 具有吸附特性，分装保存时需使用硅烷化容器或低吸附离心管，使用前充分混匀。
脂多糖,来源于大肠杆菌O128:B12
Lipopolysaccharides, from E. coli O128:B12 (LPS, from Escherichia coli (O128:B12)) 是从大肠杆菌 (E. coli O128:B12) 中提取的脂多糖内毒素和 TLR-4 激活剂，是一种 S (smooth) 型 LPS。Lipopolysaccharides, from E. coli O128:B12 具有典型的 3 部分结构：O 抗原、R3 型核心寡糖和脂质 A。Lipopolysaccharides, from E. coli O128:B12 激活免疫细胞的 TLR-4，可用于构建动物新生儿脑部炎症模型，并可能影响新生儿早产。
建议配制浓度 ≥2 mg/mL，充分涡旋震荡 10 分钟以上，必要时辅助超声。由于 LPS 具有吸附特性，分装保存时需使用硅烷化容器或低吸附离心管，使用前充分混匀。
脂多糖
Lipopolysaccharides, from E. coli O55:B5 (LPS, from Escherichia coli (O55:B5)) 是从大肠杆菌 (E. coli O55:B5) 中提取的脂多糖内毒素和 TLR-4 激活剂，是一种 S (smooth) 型 LPS。Lipopolysaccharides, from E. coli O55:B5 具有典型的 3 部分结构：O 抗原、核心寡糖和脂质 A。Lipopolysaccharides, from E. coli O55:B5 激活免疫细胞的 TLR-4，具有高致热原性，以及剂量和血清型特异性。Lipopolysaccharides, from E. coli O55:B5 可用于诱导多种细胞炎症和动物炎症相关模型。
建议配制浓度 ≥2 mg/mL，充分涡旋震荡 10 分钟以上，必要时辅助超声。由于 LPS 具有吸附特性，分装保存时需使用硅烷化容器或低吸附离心管，使用前充分混匀。
脂多糖,来源于大肠杆菌O111:B4
Lipopolysaccharides, from E. coli O111:B4 (LPS, from Escherichia coli (O111:B4)) 是从大肠杆菌 (E. coli O111:B4) 中提取的脂多糖内毒素和 TLR-4 激活剂，是一种 S (smooth) 型 LPS。Lipopolysaccharides (LPS), from E. coli O111:B4 具有典型的 3 部分结构：O 抗原、R3 型核心寡糖和脂质 A。Lipopolysaccharides (LPS), from E. coli O111:B4 激活免疫细胞的 TLR-4，可引起显著胃部疾病。Lipopolysaccharides (LPS), from E. coli O111:B4 可用于诱导细胞炎症和动物炎症相关模型。
建议配制浓度 ≥2 mg/mL，充分涡旋震荡 10 分钟以上，必要时辅助超声。由于 LPS 具有吸附特性，分装保存时需使用硅烷化容器或低吸附离心管，使用前充分混匀。
脂多糖,来源于大肠杆菌O26:B6
Lipopolysaccharides, from E. coli (Escherichia coli) O26:B6 是来源于大肠杆菌 (E. coli) 的脂多糖内毒素和 TLR-4 激活剂，是一种 S 型 LPS，可激活免疫系统的致病相关分子模式 (PAMP) 和诱导细胞分泌迁移体。Lipopolysaccharides, from E. coli O26:B6 具有典型的 3 部分结构：O 抗原、核心寡糖和脂质 A，能够被核心特异性单克隆抗体 MAb J8-4C10 识别。Lipopolysaccharides, from E. coli O26:B6 可促进血浆中促炎细胞因子增加，进而引发下丘脑-垂体-肾上腺 (HPA) 激活，导致肾上腺氧化损伤。Lipopolysaccharides, from E. coli O26:B6 可用于构建多种模型，如细胞炎症模型，脓毒症，急性肺损伤，肾上腺功能障碍和膀胱感染模型等。
建议配制浓度 ≥2 mg/mL，充分涡旋震荡 10 分钟以上，必要时辅助超声。由于 LPS 具有吸附特性，分装保存时需使用硅烷化容器或低吸附离心管，使用前充分混匀。
Biotin-Lipopolysaccharide, from E.coli O111:B4 (Biotin-LPS, from Escherichia coli (O111:B4)) 是一种生物素偶联的 Lipopolysaccharide (LPS) (HY-D1056A1)，可以与链霉亲和素蛋白偶联。Biotin-Lipopolysaccharide, from E.coli O111:B4 可用于鉴定Lipopolysaccharide 配体。Lipopolysaccharides, from E. coli O111:B4 (LPS, from Escherichia coli (O111:B4)) 是从大肠杆菌 (E. coli O111:B4) 中提取的脂多糖内毒素和 TLR-4 激活剂，是一种 S (smooth) 型 LPS。Lipopolysaccharides, from E. coli O111:B4 具有典型的 3 部分结构：O 抗原、R3 型核心寡糖和脂质 A。Lipopolysaccharides, from E. coli O111:B4 激活免疫细胞的 TLR-4，可引起显著胃部疾病。Lipopolysaccharides, from E. coli O111:B4 还可以诱导小鼠巨噬细胞的 M1 型极化。
建议配制浓度 ≥2 mg/mL，充分涡旋震荡 10 分钟以上，必要时辅助超声。由于 LPS 具有吸附特性，分装保存时需使用硅烷化容器或低吸附离心管，使用前充分混匀。
脂多糖,来源于肠沙门氏菌肠道血清型
Lipopolysaccharides, from S. enterica (Salmonella enterica) serotype typhimurium 是来源于血清型沙门氏菌 (S. enterica) 的脂多糖内毒素和 TLR4 激活剂，是 S 型 LPS。Lipopolysaccharides, from S. enterica 具有典型的 3 部分结构：O 抗原、核心寡糖和脂质 A。Lipopolysaccharides, from S. enterica serotype typhimurium 可调控细菌在树突状细胞（DC）中的命运，决定 DC 细胞对细菌的摄取、降解和免疫功能的激活。
建议配制浓度 ≥2 mg/mL，充分涡旋震荡 10 分钟以上，必要时辅助超声。由于 LPS 具有吸附特性，分装保存时需使用硅烷化容器或低吸附离心管，使用前充分混匀。
脂多糖,来源于牙龈卟啉单胞菌
Lipopolysaccharides, from P. gingivalis (LPS, from Porphyromonas gingivalis) 是从牙龈变形杆菌 (P. gingivalis) 中提取的脂多糖内毒素和 TLR-4 激活剂，是一种 S (smooth) 型 LPS。Lipopolysaccharides, from P. gingivalis 具有典型的 3 部分结构：O 抗原、核心寡糖和脂质 A。Lipopolysaccharides, from P. gingivalis 激活免疫细胞的 TLR-4，是牙周病机制中的重要毒力因子。Lipopolysaccharides, from P. gingivalis 可用于牙周炎相关研究。
建议配制浓度 ≥2 mg/mL，充分涡旋震荡 10 分钟以上，必要时辅助超声。由于 LPS 具有吸附特性，分装保存时需使用硅烷化容器或低吸附离心管，使用前充分混匀。
脂多糖,来源于大肠杆菌O127:B8
Lipopolysaccharides, from E. coli O127:B8 (LPS, from Escherichia coli (O127:B8)) 是从大肠杆菌 (E. coli O127:B8) 中提取的脂多糖内毒素和 TLR-4 激活剂，是一种 S (smooth) 型 LPS。Lipopolysaccharides, from E. coli O127:B8 具有典型的 3 部分结构：O 抗原、R3 型核心寡糖和脂质 A。Lipopolysaccharides, from E. coli O127:B8 激活免疫细胞的 TLR-4，可引起炎症反应和回肠收缩力，可用于构建肠道炎症模型。
建议配制浓度 ≥2 mg/mL，充分涡旋震荡 10 分钟以上，必要时辅助超声。由于 LPS 具有吸附特性，分装保存时需使用硅烷化容器或低吸附离心管，使用前充分混匀。
脂多糖,来源于大肠杆菌O128:B12
Lipopolysaccharides, from E. coli O128:B12 (LPS, from Escherichia coli (O128:B12)) 是从大肠杆菌 (E. coli O128:B12) 中提取的脂多糖内毒素和 TLR-4 激活剂，是一种 S (smooth) 型 LPS。Lipopolysaccharides, from E. coli O128:B12 具有典型的 3 部分结构：O 抗原、R3 型核心寡糖和脂质 A。Lipopolysaccharides, from E. coli O128:B12 激活免疫细胞的 TLR-4，可用于构建动物新生儿脑部炎症模型，并可能影响新生儿早产。
建议配制浓度 ≥2 mg/mL，充分涡旋震荡 10 分钟以上，必要时辅助超声。由于 LPS 具有吸附特性，分装保存时需使用硅烷化容器或低吸附离心管，使用前充分混匀。
脂多糖
Lipopolysaccharides, from E. coli O55:B5 (LPS, from Escherichia coli (O55:B5)) 是从大肠杆菌 (E. coli O55:B5) 中提取的脂多糖内毒素和 TLR-4 激活剂，是一种 S (smooth) 型 LPS。Lipopolysaccharides, from E. coli O55:B5 具有典型的 3 部分结构：O 抗原、核心寡糖和脂质 A。Lipopolysaccharides, from E. coli O55:B5 激活免疫细胞的 TLR-4，具有高致热原性，以及剂量和血清型特异性。Lipopolysaccharides, from E. coli O55:B5 可用于诱导多种细胞炎症和动物炎症相关模型。
建议配制浓度 ≥2 mg/mL，充分涡旋震荡 10 分钟以上，必要时辅助超声。由于 LPS 具有吸附特性，分装保存时需使用硅烷化容器或低吸附离心管，使用前充分混匀。
脂多糖,来源于大肠杆菌O111:B4
Lipopolysaccharides, from E. coli O111:B4 (LPS, from Escherichia coli (O111:B4)) 是从大肠杆菌 (E. coli O111:B4) 中提取的脂多糖内毒素和 TLR-4 激活剂，是一种 S (smooth) 型 LPS。Lipopolysaccharides (LPS), from E. coli O111:B4 具有典型的 3 部分结构：O 抗原、R3 型核心寡糖和脂质 A。Lipopolysaccharides (LPS), from E. coli O111:B4 激活免疫细胞的 TLR-4，可引起显著胃部疾病。Lipopolysaccharides (LPS), from E. coli O111:B4 可用于诱导细胞炎症和动物炎症相关模型。
建议配制浓度 ≥2 mg/mL，充分涡旋震荡 10 分钟以上，必要时辅助超声。由于 LPS 具有吸附特性，分装保存时需使用硅烷化容器或低吸附离心管，使用前充分混匀。
脂多糖,来源于大肠杆菌O26:B6
Lipopolysaccharides, from E. coli (Escherichia coli) O26:B6 是来源于大肠杆菌 (E. coli) 的脂多糖内毒素和 TLR-4 激活剂，是一种 S 型 LPS，可激活免疫系统的致病相关分子模式 (PAMP) 和诱导细胞分泌迁移体。Lipopolysaccharides, from E. coli O26:B6 具有典型的 3 部分结构：O 抗原、核心寡糖和脂质 A，能够被核心特异性单克隆抗体 MAb J8-4C10 识别。Lipopolysaccharides, from E. coli O26:B6 可促进血浆中促炎细胞因子增加，进而引发下丘脑-垂体-肾上腺 (HPA) 激活，导致肾上腺氧化损伤。Lipopolysaccharides, from E. coli O26:B6 可用于构建多种模型，如细胞炎症模型，脓毒症，急性肺损伤，肾上腺功能障碍和膀胱感染模型等。
建议配制浓度 ≥2 mg/mL，充分涡旋震荡 10 分钟以上，必要时辅助超声。由于 LPS 具有吸附特性，分装保存时需使用硅烷化容器或低吸附离心管，使用前充分混匀。
Biotin-Lipopolysaccharide, from E.coli O111:B4 (Biotin-LPS, from Escherichia coli (O111:B4)) 是一种生物素偶联的 Lipopolysaccharide (LPS) (HY-D1056A1)，可以与链霉亲和素蛋白偶联。Biotin-Lipopolysaccharide, from E.coli O111:B4 可用于鉴定Lipopolysaccharide 配体。Lipopolysaccharides, from E. coli O111:B4 (LPS, from Escherichia coli (O111:B4)) 是从大肠杆菌 (E. coli O111:B4) 中提取的脂多糖内毒素和 TLR-4 激活剂，是一种 S (smooth) 型 LPS。Lipopolysaccharides, from E. coli O111:B4 具有典型的 3 部分结构：O 抗原、R3 型核心寡糖和脂质 A。Lipopolysaccharides, from E. coli O111:B4 激活免疫细胞的 TLR-4，可引起显著胃部疾病。Lipopolysaccharides, from E. coli O111:B4 还可以诱导小鼠巨噬细胞的 M1 型极化。
建议配制浓度 ≥2 mg/mL，充分涡旋震荡 10 分钟以上，必要时辅助超声。由于 LPS 具有吸附特性，分装保存时需使用硅烷化容器或低吸附离心管，使用前充分混匀。
脂多糖
Lipopolysaccharides, from E. coli O55:B5 (LPS, from Escherichia coli (O55:B5)) 是从大肠杆菌 (E. coli O55:B5) 中提取的脂多糖内毒素和 TLR-4 激活剂，是一种 S (smooth) 型 LPS。Lipopolysaccharides, from E. coli O55:B5 具有典型的 3 部分结构：O 抗原、核心寡糖和脂质 A。Lipopolysaccharides, from E. coli O55:B5 激活免疫细胞的 TLR-4，具有高致热原性，以及剂量和血清型特异性。Lipopolysaccharides, from E. coli O55:B5 可用于诱导多种细胞炎症和动物炎症相关模型。
建议配制浓度 ≥2 mg/mL，充分涡旋震荡 10 分钟以上，必要时辅助超声。由于 LPS 具有吸附特性，分装保存时需使用硅烷化容器或低吸附离心管，使用前充分混匀。
Human ACKR3 mRNA 能编码人类非典型趋化因子受体 3（ACKR3）蛋白，该蛋白属于 G 蛋白偶联受体家族的一员。ACKR3 是一种典型的趋化因子受体，它通过高亲和力的趋化因子结合来控制趋化因子的水平和定位，这种结合与经典的配体驱动信号转导级联反应无关，而是导致趋化因子的封闭、降解或跨细胞转运。
Western blot analysis of extracts from THP-1(lane 2(20μg), Jurkat (lane 3(20μg) and NIH3T3(lane 4(20μg) using FOXO1A (HY-P80132) Rabbit mAb. Proteins were transferred
to a PVDF membrane and blocked with 5% non-fat milk in TBST for 2 hour at room temperature. The primary antibody (1/1000) and Loading control antibody (Beta Actin, HY-P80438, 1/10000) was
used in 5% non-fat milk in TBST at 4°C overnight. Goat Anti-Mouse/Rabbit IgG-HRP Secondary Antibody (1/10000) was used for 1 hour at room temperature.
Western blot analysis of extracts from THP-1(lane 2(20μg), Jurkat (lane 3(20μg) and NIH3T3(lane 4(20μg) using FOXO1A (HY-P80132) Rabbit mAb. Proteins were transferred
to a PVDF membrane and blocked with 5% non-fat milk in TBST for 2 hour at room temperature. The primary antibody (1/1000) and Loading control antibody (Beta Actin, HY-P80438, 1/10000) was
used in 5% non-fat milk in TBST at 4°C overnight. Goat Anti-Mouse/Rabbit IgG-HRP Secondary Antibody (1/10000) was used for 1 hour at room temperature.
Western blot analysis of extracts from THP-1(lane 2(20μg), Jurkat (lane 3(20μg) and NIH3T3(lane 4(20μg) using FOXO1A (HY-P80132) Rabbit mAb. Proteins were transferred
to a PVDF membrane and blocked with 5% non-fat milk in TBST for 2 hour at room temperature. The primary antibody (1/1000) and Loading control antibody (Beta Actin, HY-P80438, 1/10000) was
used in 5% non-fat milk in TBST at 4°C overnight. Goat Anti-Mouse/Rabbit IgG-HRP Secondary Antibody (1/10000) was used for 1 hour at room temperature.
Western blot analysis of extracts from THP-1(lane 2(20μg), Jurkat (lane 3(20μg) and NIH3T3(lane 4(20μg) using FOXO1A (HY-P80132) Rabbit mAb. Proteins were transferred
to a PVDF membrane and blocked with 5% non-fat milk in TBST for 2 hour at room temperature. The primary antibody (1/1000) and Loading control antibody (Beta Actin, HY-P80438, 1/10000) was
MedchemExpress Validation 03
Western blot analysis of extracts from THP-1(lane 2(20μg), Jurkat (lane 3(20μg) and NIH3T3(lane 4(20μg) using FOXO1A (HY-P80132) Rabbit mAb. Proteins were transferred
MedchemExpress Validation 04
Western blot analysis of extracts from THP-1(lane 2(20μg), Jurkat (lane 3(20μg) and NIH3T3(lane 4(20μg) using FOXO1A (HY-P80132) Rabbit mAb. Proteins were transferred
to a PVDF membrane and blocked with 5% non-fat milk in TBST for 2 hour at room temperature. The primary antibody (1/1000) and Loading control antibody (Beta Actin, HY-P80438, 1/10000) was
used in 5% non-fat milk in TBST at 4°C overnight. Goat Anti-Mouse/Rabbit IgG-HRP Secondary Antibody (1/10000) was used for 1 hour at room temperature.
MedchemExpress Validation
Western blot analysis of extracts from THP-1(lane 2(20μg), Jurkat (lane 3(20μg) and NIH3T3(lane 4(20μg) using FOXO1A (HY-P80132) Rabbit mAb. Proteins were transferred
to a PVDF membrane and blocked with 5% non-fat milk in TBST for 2 hour at room temperature. The primary antibody (1/1000) and Loading control antibody (Beta Actin, HY-P80438, 1/10000) was
used in 5% non-fat milk in TBST at 4°C overnight. Goat Anti-Mouse/Rabbit IgG-HRP Secondary Antibody (1/10000) was used for 1 hour at room temperature.
Western blot analysis of extracts from THP-1(lane 2(20μg), Jurkat (lane 3(20μg) and NIH3T3(lane 4(20μg) using FOXO1A (HY-P80132) Rabbit mAb. Proteins were transferred
to a PVDF membrane and blocked with 5% non-fat milk in TBST for 2 hour at room temperature. The primary antibody (1/1000) and Loading control antibody (Beta Actin, HY-P80438, 1/10000) was
used in 5% non-fat milk in TBST at 4°C overnight. Goat Anti-Mouse/Rabbit IgG-HRP Secondary Antibody (1/10000) was used for 1 hour at room temperature.
MedchemExpress Validation
Western blot analysis of extracts from THP-1(lane 2(20μg), Jurkat (lane 3(20μg) and NIH3T3(lane 4(20μg) using FOXO1A (HY-P80132) Rabbit mAb. Proteins were transferred
to a PVDF membrane and blocked with 5% non-fat milk in TBST for 2 hour at room temperature. The primary antibody (1/1000) and Loading control antibody (Beta Actin, HY-P80438, 1/10000) was
used in 5% non-fat milk in TBST at 4°C overnight. Goat Anti-Mouse/Rabbit IgG-HRP Secondary Antibody (1/10000) was used for 1 hour at room temperature.
MedchemExpress Validation
Western blot analysis of extracts from THP-1(lane 2(20μg), Jurkat (lane 3(20μg) and NIH3T3(lane 4(20μg) using FOXO1A (HY-P80132) Rabbit mAb. Proteins were transferred
to a PVDF membrane and blocked with 5% non-fat milk in TBST for 2 hour at room temperature. The primary antibody (1/1000) and Loading control antibody (Beta Actin, HY-P80438, 1/10000) was
used in 5% non-fat milk in TBST at 4°C overnight. Goat Anti-Mouse/Rabbit IgG-HRP Secondary Antibody (1/10000) was used for 1 hour at room temperature.
MedchemExpress Validation
Western blot analysis of extracts from THP-1(lane 2(20μg), Jurkat (lane 3(20μg) and NIH3T3(lane 4(20μg) using FOXO1A (HY-P80132) Rabbit mAb. Proteins were transferred
to a PVDF membrane and blocked with 5% non-fat milk in TBST for 2 hour at room temperature. The primary antibody (1/1000) and Loading control antibody (Beta Actin, HY-P80438, 1/10000) was
used in 5% non-fat milk in TBST at 4°C overnight. Goat Anti-Mouse/Rabbit IgG-HRP Secondary Antibody (1/10000) was used for 1 hour at room temperature.
MedchemExpress Validation
Western blot analysis of extracts from THP-1(lane 2(20μg), Jurkat (lane 3(20μg) and NIH3T3(lane 4(20μg) using FOXO1A (HY-P80132) Rabbit mAb. Proteins were transferred
to a PVDF membrane and blocked with 5% non-fat milk in TBST for 2 hour at room temperature. The primary antibody (1/1000) and Loading control antibody (Beta Actin, HY-P80438, 1/10000) was
used in 5% non-fat milk in TBST at 4°C overnight. Goat Anti-Mouse/Rabbit IgG-HRP Secondary Antibody (1/10000) was used for 1 hour at room temperature.
MedchemExpress Validation
Western blot analysis of extracts from THP-1(lane 2(20μg), Jurkat (lane 3(20μg) and NIH3T3(lane 4(20μg) using FOXO1A (HY-P80132) Rabbit mAb. Proteins were transferred
to a PVDF membrane and blocked with 5% non-fat milk in TBST for 2 hour at room temperature. The primary antibody (1/1000) and Loading control antibody (Beta Actin, HY-P80438, 1/10000) was
used in 5% non-fat milk in TBST at 4°C overnight. Goat Anti-Mouse/Rabbit IgG-HRP Secondary Antibody (1/10000) was used for 1 hour at room temperature.
MedchemExpress Validation
Western blot analysis of extracts from THP-1(lane 2(20μg), Jurkat (lane 3(20μg) and NIH3T3(lane 4(20μg) using FOXO1A (HY-P80132) Rabbit mAb. Proteins were transferred
to a PVDF membrane and blocked with 5% non-fat milk in TBST for 2 hour at room temperature. The primary antibody (1/1000) and Loading control antibody (Beta Actin, HY-P80438, 1/10000) was
used in 5% non-fat milk in TBST at 4°C overnight. Goat Anti-Mouse/Rabbit IgG-HRP Secondary Antibody (1/10000) was used for 1 hour at room temperature.
![[DPro5] Corticotropin Releasing Factor, human, rat TFA](http://hg.y866.cn/biomolecule/lib/file/product_pic/hy-p3684a.gif)
![[DPro5] Corticotropin Releasing Factor, human, rat](http://hg.y866.cn/biomolecule/lib/file/product_pic/hy-p3684.gif)
